UNS Stainless Steel Pipe & Tube – Grades, Standards, Dimensions & Industrial Supply
Xi'an Dongmeng Group Co., Ltd. is a professional stainless steel manufacturer and exporter providing UNS-designated stainless steel pipes and tubes for global industrial procurement, engineering projects, distributors, fabrication companies and OEM manufacturers.
Our stainless steel piping solutions cover conventional austenitic grades, duplex stainless steels, super duplex materials and high-performance corrosion-resistant alloys.
Material selection is supported by recognized ASTM, ASME and EN specifications, with seamless and longitudinally welded manufacturing options, project-specific dimensions, inspection requirements and export packaging.
Whether your project requires UNS S30403 for general process piping, UNS S31603 for chemical processing, UNS S32205 for chloride-containing environments or UNS S32750 for demanding offshore applications, we can assist with material specification review and technical procurement requirements.
Request a quotation, submit your material specification or contact our team for grade comparison and pipe dimension support.
-
UNS S38815 Stainless Steel Pipe and Tube | High Silicon Austenitic Stainless Steel Supp...Product Name: UNS S38815 Stainless Steel Pipe and Tube. Material Type: High Silicon Austenitic Stainless Steel. Material Category: 14Cr-16Ni-6Si-1Mo-1Cu. Also Called: S38815 Pipe, High Silicon
-
UNS S44735 Stainless Steel TubeUNS S44735 Super ferritic Stainless Steel Tube. Standard: ASTM A213, ASTM A268, ASTM A249 . Grade: UNS S44735 . OD: 8 - 127mm. WT: 0.5 - 20mm . L: 5 - 13m . Manufacturing Process: Seamless or Welded.
What Is UNS Stainless Steel Pipe?
UNS stainless steel pipe is manufactured from stainless steel materials identified by the Unified Numbering System (UNS).
The UNS system provides standardized alloy designations used for material identification and cross-referencing across international engineering and procurement specifications.
For example:
UNS S30400 identifies Type 304 stainless steel.
UNS S30403 identifies low-carbon Type 304L stainless steel.
UNS S31603 identifies low-carbon Type 316L stainless steel.
UNS S32205 identifies a commonly specified composition of 2205 duplex stainless steel.
UNS S32750 identifies 2507 super duplex stainless steel.
A UNS designation identifies the alloy but does not independently establish the complete manufacturing, mechanical, dimensional, testing or delivery requirements for a finished pipe.
A complete industrial pipe specification should therefore identify:
Material Grade + Product Standard + Manufacturing Method + Dimensions + Delivery Condition + Inspection Requirements.
For example:
ASTM A312 TP316L / UNS S31603 / Seamless / NPS 2 / SCH 40S / 6 m / MTC EN 10204 3.1
This combination provides substantially more procurement information than a material designation alone.
Important Note About UNS Numbering
Most stainless steels covered by this category use UNS designations beginning with the letter S.
However, some high-alloy austenitic stainless steels use different prefixes. A notable example is 904L stainless steel, designated UNS N08904.
These materials may be included in stainless steel grade comparisons, but their exact UNS designations must be preserved in procurement documents.
UNS Stainless Steel Pipe Grades and Material Classification
Stainless steel pipes are available in different alloy families to address varying requirements for corrosion resistance, mechanical strength, fabrication and operating temperature.
Austenitic Stainless Steel Pipe Grades
Austenitic stainless steels are widely used in industrial piping systems because of their corrosion resistance, fabrication characteristics and availability across multiple product standards.
| Stainless Steel Grade | UNS Designation | Common EN Grade | Main Characteristics |
|---|---|---|---|
| 304 | S30400 | 1.4301 | General-purpose corrosion resistance |
| 304L | S30403 | 1.4307 | Low-carbon grade for welded fabrication |
| 304H | S30409 | — | Controlled carbon for applicable elevated-temperature service |
| 316 | S31600 | 1.4401 | Molybdenum-alloyed corrosion resistance |
| 316L | S31603 | 1.4404 | Low-carbon grade for welded process piping |
| 316H | S31609 | — | High-temperature applications under suitable specifications |
| 316Ti | S31635 | 1.4571 | Titanium-stabilized austenitic stainless steel |
| 317L | S31703 | 1.4438 | Higher molybdenum content than conventional 316L |
| 321 | S32100 | 1.4541 | Titanium-stabilized grade |
| 347 | S34700 | 1.4550 | Niobium-stabilized grade |
| 310S | S31008 | 1.4845 | High-chromium, high-nickel heat-resistant grade |
EN numbers are reference cross-designations. Chemical composition and product requirements must be checked before treating grades under different systems as equivalent.
UNS S30400 / S30403 – 304 and 304L Stainless Steel Pipe
UNS S30400 and S30403 are commonly selected for general industrial piping, equipment fabrication and process systems operating in appropriately controlled environments.
304L has a lower specified maximum carbon content than 304, reducing susceptibility to sensitization during welding.
Typical applications include:
General process piping
Water handling equipment
Industrial machinery
Food-processing equipment
Fabricated piping assemblies
304 and 304L should not be selected automatically for concentrated chloride environments or aggressive chemical service.
UNS S31600 / S31603 – 316 and 316L Stainless Steel Pipe
UNS S31600 and S31603 contain molybdenum, which improves resistance to localized corrosion compared with conventional 304 grades under many relevant conditions.
316L is frequently specified for welded process piping and corrosion-resistant industrial equipment.
Typical applications include:
Chemical processing systems
Industrial water treatment
Heat exchangers
Pharmaceutical process equipment
Petrochemical piping
Industrial fluid handling
The suitability of 316L depends on chloride concentration, operating temperature, pH, crevice conditions and other process variables.
316L is not inherently immune to chloride stress corrosion cracking, pitting or crevice corrosion.
UNS S32100 / S34700 – Stabilized Stainless Steel Pipe
UNS S32100 and S34700 are titanium- and niobium-stabilized austenitic stainless steels, respectively.
They are considered for applications where resistance to sensitization during thermal exposure is important.
Typical applications include:
Specified high-temperature process piping
Refinery equipment
Thermal processing systems
Industrial heating equipment
The actual allowable operating temperature and mechanical design stresses must be established using the governing material and piping design codes.
UNS S31008 – 310S Stainless Steel Pipe
UNS S31008 is a high-chromium, high-nickel austenitic stainless steel developed for elevated-temperature service.
It is used in selected furnace and heat-treatment applications where oxidation resistance is important.
Potential applications include:
Furnace components
Heat-treatment systems
Thermal processing equipment
High-temperature industrial assemblies
Material selection must consider oxidation, carburization, sulfidation, thermal cycling and creep requirements rather than temperature alone.
Duplex Stainless Steel Pipe Grades
Duplex stainless steels contain a mixed ferritic-austenitic microstructure.
Compared with conventional austenitic grades, correctly processed duplex stainless steels generally provide higher yield strength and can offer improved resistance to certain chloride-related corrosion mechanisms.
However, corrosion resistance, weldability, heat-treatment requirements and service temperature limitations vary by grade.
| Duplex Grade | UNS Designation | EN Number | Main Selection Feature |
|---|---|---|---|
| Lean Duplex 2101 | S32101 | 1.4162 | Reduced nickel content and relatively high strength |
| Duplex 2304 | S32304 | 1.4362 | Lean duplex option for suitable environments |
| Duplex 2205 | S31803 | 1.4462 | Established duplex grade with defined composition limits |
| Duplex 2205 | S32205 | 1.4462 | More restricted composition range commonly specified for 2205 |
| Super Duplex 2507 | S32750 | 1.4410 | High strength and improved localized corrosion resistance |
| Super Duplex S32760 | S32760 | 1.4501 | Highly alloyed duplex grade for demanding corrosive service |
UNS S31803 vs S32205 – Duplex 2205 Stainless Steel Pipe
Duplex 2205 is one of the most important materials for industrial corrosion-resistant piping.
It combines high mechanical strength with improved resistance to chloride-induced stress corrosion cracking compared with conventional 300-series austenitic grades in many environments.
Typical applications include:
Offshore oil and gas systems
Chemical processing equipment
Water treatment installations
Heat exchangers
Industrial piping exposed to chloride-containing media
UNS S31803 and S32205 are closely related 2205 designations, but they are not automatically interchangeable for every purchase order.
S32205 has more restricted alloy chemistry requirements intended to support consistent performance.
When an engineering specification requires S32205, material identified only as S31803 must not be substituted without verifying the applicable chemistry and obtaining the required approval.
UNS S32750 – Super Duplex 2507 Stainless Steel Pipe
UNS S32750 is a highly alloyed duplex stainless steel used in demanding corrosion and strength applications.
Compared with conventional 2205 duplex stainless steel, 2507 generally offers higher resistance to localized chloride corrosion when correctly processed.
Typical applications include:
Offshore processing equipment
Seawater-related systems
Desalination equipment
Chemical processing systems
High-strength corrosion-resistant piping
Super duplex selection requires particular attention to thermal processing, weld procedures, intermetallic phase control and project-specific corrosion testing.
UNS S32760 – Super Duplex Stainless Steel Pipe
UNS S32760 is another highly alloyed duplex stainless steel used in demanding industrial environments.
Its alloy design incorporates chromium, molybdenum, nitrogen and other alloying elements to support high strength and corrosion resistance.
Typical applications include offshore equipment, chemical processing systems and selected seawater-handling components.
S32760 and S32750 should be evaluated as separate material specifications, even when their intended applications overlap.
High-Performance Austenitic Stainless Steel Pipe
Highly alloyed austenitic stainless steels are used when the corrosion resistance of conventional 304L or 316L is inadequate.
| Grade | UNS Designation | EN Number | Main Application Considerations |
|---|---|---|---|
| 317L | S31703 | 1.4438 | Higher molybdenum content for selected chemical environments |
| 904L | N08904 | 1.4539 | High-nickel, molybdenum- and copper-alloyed stainless steel |
| 254 SMO | S31254 | 1.4547 | High-molybdenum austenitic grade for demanding chloride environments |
UNS N08904 – 904L Stainless Steel Pipe
904L is a high-alloy austenitic stainless steel with elevated nickel and molybdenum content and a copper addition.
It was developed for demanding chemical environments and is commonly considered in certain acid-handling applications.
Typical applications include:
Chemical processing equipment
Selected sulfuric acid systems
Petrochemical processing
Heat exchangers
Corrosion-resistant industrial piping
904L suitability in acidic environments depends strongly on acid concentration, temperature, impurities and the presence of oxidizing or reducing conditions.
UNS S31254 – 254 SMO Stainless Steel Pipe
UNS S31254 is a high-molybdenum austenitic stainless steel designed for demanding corrosion environments.
Its alloy chemistry supports improved resistance to pitting and crevice corrosion compared with conventional 300-series stainless steels.
Typical applications include:
Seawater-related processing equipment
Desalination systems
Flue gas cleaning equipment
Chemical processing plants
High-corrosion-resistance heat exchangers
The final grade selection must be verified against the specific operating environment and project specification.
Ferritic and Specialty Stainless Steel Tubing
In addition to austenitic and duplex piping materials, certain ferritic stainless steels are used in specialized tubing applications.
Representative grades include:
| Grade | UNS Designation | Material Family | Typical Consideration |
|---|---|---|---|
| 409 | S40900 | Ferritic | Selected exhaust and thermal equipment |
| 430 | S43000 | Ferritic | Moderate-corrosion applications |
| 444 | S44400 | Ferritic | Molybdenum-alloyed ferritic tubing for suitable environments |
Ferritic and martensitic stainless steel tubing may be specified under ASTM A268/A268M where the selected grade is included in the applicable specification.
These materials should not automatically be treated as direct substitutes for ASTM A312 austenitic pressure pipe.
Availability, required heat treatment, welding behavior and allowable service conditions must be evaluated separately.
ASTM, ASME and EN Standards for UNS Stainless Steel Pipe
A correct product standard is essential for defining manufacturing requirements, chemical composition, mechanical properties, testing and acceptance criteria.
Common Stainless Steel Pipe and Tube Standards
| Standard | Product Scope | Typical Procurement Application |
|---|---|---|
| ASTM A312/A312M | Seamless, welded and heavily cold-worked austenitic stainless steel pipe | Industrial process piping |
| ASME SA312 | ASME material specification corresponding to ASTM A312 | Applications requiring applicable ASME material specifications |
| ASTM A790/A790M | Seamless and welded duplex stainless steel pipe | Duplex and super duplex industrial piping |
| ASME SA790 | ASME material specification corresponding to ASTM A790 | Applicable engineered piping systems |
| ASTM A358/A358M | Electric-fusion-welded austenitic stainless steel pipe | Larger-diameter and fabricated pipe applications |
| ASTM A269/A269M | Seamless and welded austenitic stainless steel tubing | General-service precision tubing |
| ASTM A789/A789M | Seamless and welded duplex stainless steel tubing | Duplex tubing applications |
| ASTM A213/A213M | Seamless boiler, superheater and heat-exchanger tubing | Thermal and heat-transfer equipment |
| ASTM A249/A249M | Welded austenitic boiler, superheater and heat-exchanger tubing | Welded heat-transfer tubing |
| ASTM A270/A270M | Austenitic stainless steel sanitary tubing | Sanitary processing systems |
| ASTM A268/A268M | Ferritic and martensitic stainless steel tubing | Specialty tubing applications |
| EN 10216-5 | Seamless stainless steel tubes for pressure purposes | European pressure-tube applications |
| EN 10217-7 | Welded stainless steel tubes for pressure purposes | European welded pressure-tube applications |
| ASME B36.19 | Dimensional standard for stainless steel pipe | NPS and stainless pipe schedules |
| EN ISO 1127 | Stainless steel tube dimensions and tolerances | European metric dimensional specifications |
How to Specify Standards Correctly
Austenitic process pipe:
ASTM A312 TP316L / UNS S31603 / ASME B36.19
Duplex process pipe:
ASTM A790 UNS S32205 / ASME B36.19
Austenitic general-service tubing:
ASTM A269 TP316L / UNS S31603 / OD × WT
Duplex general-service tubing:
ASTM A789 UNS S32750 / OD × WT
Heat-exchanger tubing:
ASTM A213 TP316L / OD × WT / Specified Condition
These are examples of specification formats. Each purchase order must use the applicable grade, manufacturing route and standard edition.
Important: ASTM material specifications, dimensional standards and piping design codes perform different functions.
For example, ASME B36.19 establishes pipe dimensions, while ASME B31.3 provides requirements for process piping design, fabrication, examination and testing.
Neither a UNS grade nor a pipe schedule alone establishes an allowable operating pressure.
UNS Stainless Steel Pipe Sizes and Dimensions
Industrial stainless steel pipes are commonly ordered using Nominal Pipe Size (NPS), outside diameter and wall thickness schedule.
Precision tubing is more commonly ordered by actual outside diameter and specified wall thickness.
ASME B36.19 Stainless Steel Pipe Schedule Chart
The following table shows selected nominal stainless steel pipe dimensions for reference.
All wall thickness values are in millimeters.
| NPS | DN | Outside Diameter (mm) | SCH 5S | SCH 10S | SCH 40S | SCH 80S |
|---|---|---|---|---|---|---|
| 1/2" | DN15 | 21.3 | 1.65 | 2.11 | 2.77 | 3.73 |
| 3/4" | DN20 | 26.7 | 1.65 | 2.11 | 2.87 | 3.91 |
| 1" | DN25 | 33.4 | 1.65 | 2.77 | 3.38 | 4.55 |
| 1-1/2" | DN40 | 48.3 | 1.65 | 2.77 | 3.68 | 5.08 |
| 2" | DN50 | 60.3 | 1.65 | 2.77 | 3.91 | 5.54 |
| 3" | DN80 | 88.9 | 2.11 | 3.05 | 5.49 | 7.62 |
| 4" | DN100 | 114.3 | 2.11 | 3.05 | 6.02 | 8.56 |
| 6" | DN150 | 168.3 | 2.77 | 3.40 | 7.11 | 10.97 |
| 8" | DN200 | 219.1 | 2.77 | 3.76 | 8.18 | 12.70 |
| 10" | DN250 | 273.0 | 3.40 | 4.19 | 9.27 | 12.70 |
| 12" | DN300 | 323.9 | 3.96 | 4.57 | 9.53 | 12.70 |
These are representative nominal dimensions, not a complete supply-range declaration. Confirm dimensions, availability and tolerances against the applicable edition of ASME B36.19 and the selected product specification before procurement.
Heavy-Wall and Special-Dimension Pipe
Projects requiring wall thicknesses beyond the commonly used stainless steel S-schedules may specify dimensions from ASME B36.10M or approved project drawings, where permitted by the relevant product standard.
Examples include:
Heavy-wall seamless stainless steel pipe
Thick-wall duplex stainless steel pipe
Large-diameter fabricated stainless steel pipe
Special OD × WT combinations
Custom-length piping components
Heavy-wall pipe dimensions should always be checked against production capability and the relevant engineering requirements.
Metric Stainless Steel Tubing Dimensions
Metric tubing is typically specified using:
Outside Diameter × Wall Thickness × Length
Examples of common dimensional formats include:
12 × 1 mm
16 × 1.5 mm
19 × 1.5 mm
25 × 2 mm
38 × 2 mm
50.8 × 3 mm
These are dimensional examples only. Grade availability, tolerance class, manufacturing method and surface condition must be confirmed for each order.
Pipe Inside Diameter Calculation
The nominal inside diameter of a pipe can be estimated using:
ID = OD − 2 × Wall Thickness
For example:
NPS 2 stainless steel pipe:
Outside Diameter = 60.3 mm
SCH 40S Wall Thickness = 3.91 mm
Calculated Nominal Inside Diameter:
60.3 − (2 × 3.91) = 52.48 mm
The actual inside diameter is affected by manufacturing tolerances and the selected product standard.
For engineering design, the minimum permitted wall thickness should be considered rather than relying exclusively on nominal dimensions.
Chemical Composition and Alloy Selection
The corrosion resistance and mechanical behavior of stainless steel are influenced by their chemical composition and microstructure.
Important alloying elements include:
Chromium (Cr): Supports formation of the protective passive oxide film.
Nickel (Ni): Helps stabilize the austenitic structure and influences corrosion and fabrication properties.
Molybdenum (Mo): Improves resistance to localized corrosion in many chloride-containing environments.
Nitrogen (N): Contributes to strength, austenite stability and pitting resistance in appropriately designed alloys.
Titanium (Ti) and Niobium (Nb): Used for stabilization against sensitization in designated stainless steel grades.
Copper (Cu): Can improve corrosion resistance in selected acid environments.
Representative Grade Chemistry Comparison
| Grade | UNS | Cr (%) | Ni (%) | Mo (%) | Other Important Elements |
|---|---|---|---|---|---|
| 304L | S30403 | 18–20 | 8–12 | — | Low C |
| 316L | S31603 | 16–18 | 10–14 | 2–3 | Low C |
| 2205 | S32205 | 22–23 | 4.5–6.5 | 3.0–3.5 | N |
| 2507 | S32750 | 24–26 | 6–8 | 3–5 | N |
| 904L | N08904 | 19–23 | 23–28 | 4–5 | Cu |
| 254 SMO | S31254 | 19.5–20.5 | 17.5–18.5 | 6.0–6.5 | N, Cu |
The table provides representative composition ranges for material comparison. Exact limits for all required elements, including carbon, nitrogen, sulfur, phosphorus and residual elements, must be verified against the governing material specification and standard edition.
Chemical composition is an important starting point, but it cannot independently establish suitability for a specific corrosive environment.
Mechanical Strength and Material Performance
Mechanical strength is particularly important when selecting materials for pressure piping, structural support systems and high-load industrial applications.
The following values illustrate differences between selected austenitic and duplex pipe grades.
| Material | UNS | Tensile Strength Min. (MPa) | 0.2% Yield Strength Min. (MPa) |
|---|---|---|---|
| ASTM A312 TP304L | S30403 | 485 | 170 |
| ASTM A312 TP316L | S31603 | 485 | 170 |
| ASTM A790 Duplex 2205 | S32205 | 620 | 450 |
| ASTM A790 Super Duplex 2507 | S32750 | 800 | 550 |
Values are representative minimum requirements for the specified product standards and relevant conditions. Verify the applicable standard edition, processing condition and additional mechanical-property requirements before using them in procurement or design.
Duplex stainless steels offer substantially higher minimum yield strength than conventional annealed 304L and 316L grades.
This can support material optimization in suitably engineered applications.
However, higher yield strength does not automatically justify a thinner pipe wall.
Actual wall thickness must be determined using the applicable design code, pressure, temperature, joint efficiency, corrosion allowance, manufacturing tolerance and other relevant factors.
How to Select the Correct UNS Stainless Steel Pipe Grade
The best stainless steel grade is determined by the service environment, operating conditions, fabrication requirements and project specifications.
304L vs 316L Stainless Steel Pipe
304L is generally considered for less aggressive environments where conventional stainless steel corrosion resistance is sufficient.
316L contains molybdenum and generally provides improved localized corrosion resistance.
Choose between these grades based on:
Operating temperature
Chloride concentration
Process chemistry
Cleaning procedures
Welding requirements
Total lifecycle cost
316L should not be selected for severe chloride service without evaluating the actual corrosion conditions.
316L vs Duplex 2205 Stainless Steel Pipe
Duplex 2205 provides higher strength and generally improved resistance to chloride stress corrosion cracking compared with 316L under many relevant conditions.
It may be appropriate for more demanding chemical and chloride-related service.
However, duplex stainless steel requires suitable welding procedures and controlled thermal processing.
The relative advantages of 316L and 2205 should be assessed against the complete piping system requirements.
Duplex 2205 vs Super Duplex 2507
Super duplex 2507 provides higher alloy content and generally greater resistance to localized chloride corrosion than conventional duplex 2205.
Consider 2507 when the operating conditions exceed the validated corrosion-performance limits of 2205.
Material selection must address:
Chloride concentration
Maximum service temperature
Crevice geometry
Water chemistry
Welding and heat treatment
Intermetallic phase control
Applicable design-code requirements
904L vs 254 SMO Stainless Steel Pipe
904L is a high-nickel austenitic stainless steel used in selected chemical environments, including certain acid-handling services.
254 SMO is a high-molybdenum, nitrogen-alloyed austenitic stainless steel designed for improved resistance to localized corrosion.
Neither material should be considered universally superior.
The correct selection depends on the chemical medium, temperature, concentration, mechanical requirements and applicable corrosion data.
Corrosion Resistance and Service Environment
Stainless steels resist corrosion through a chromium-rich passive film on their surfaces.
The effectiveness and stability of this protective film depend on alloy composition and environmental conditions.
Pitting Corrosion
Pitting corrosion is a form of localized attack that can occur when the passive film breaks down, particularly in chloride-containing environments.
Molybdenum and nitrogen additions can improve pitting resistance.
Crevice Corrosion
Crevice corrosion can develop beneath deposits, gaskets, clamps or other areas where solution chemistry becomes locally aggressive.
The selection of a higher-alloy stainless steel does not eliminate the need for sound equipment design and suitable cleaning procedures.
Chloride Stress Corrosion Cracking
Certain austenitic stainless steels are susceptible to chloride stress corrosion cracking under appropriate combinations of temperature, tensile stress and environment.
Duplex stainless steels often offer improved resistance, but they are not immune under all conditions.
Intergranular Corrosion
Intergranular corrosion may be associated with sensitization from inappropriate thermal exposure.
Low-carbon and stabilized grades can reduce susceptibility under relevant conditions.
Pitting Resistance Equivalent Number (PREN)
PREN is a useful comparative indicator of pitting resistance for many stainless steel grades.
A commonly used relationship is:
PREN = %Cr + 3.3 × %Mo + 16 × %N
PREN is a composition-based screening tool, not a direct prediction of corrosion life or a universal material acceptance criterion.
Actual corrosion resistance should be evaluated using service-specific evidence and appropriate test methods.
Seamless vs Welded UNS Stainless Steel Pipe
UNS stainless steel pipes can be manufactured using different production methods.
Seamless Stainless Steel Pipe
Seamless pipe is manufactured without a longitudinal welded seam.
It is frequently specified for selected pressure, temperature and process applications.
Advantages may include:
Uniform circumferential construction without a longitudinal weld
Suitability for specifications requiring seamless production
Availability in various pipe sizes and wall thicknesses
Compatibility with selected machining and fabrication operations
Seamless manufacturing does not automatically establish superior performance for every application.
Longitudinally Welded Stainless Steel Pipe
Longitudinally welded stainless steel pipe is formed from strip or plate and welded along the pipe axis.
Common production methods include appropriate fusion welding processes and other processes permitted by the governing specification.
Potential advantages include:
Efficient production of selected diameters
Availability in a range of wall thicknesses
Consistent dimensions when manufactured under controlled procedures
Suitability for numerous industrial piping applications
The weld seam is a continuous longitudinal seam, not a circumferential connection between short pipe sections.
Welded pipe acceptance depends on the specified manufacturing procedure, heat treatment, testing and product standard.
Electric-Fusion-Welded Stainless Steel Pipe
Electric-fusion-welded stainless steel pipe is often considered for larger-diameter or fabricated pipe applications.
ASTM A358 establishes requirements for designated electric-fusion-welded austenitic stainless steel pipes.
The applicable pipe class, weld configuration and examination requirements should be specified according to the project.
Which Manufacturing Method Is Better?
Neither seamless nor welded pipe is automatically the correct choice.
Selection should consider the applicable product standard, design pressure, temperature, corrosion environment, dimensions, inspection requirements, production feasibility and overall project cost.
Surface Finishes, Pipe Ends and Custom Processing
Surface condition and end preparation can affect installation, cleanliness, fabrication and corrosion performance.
Available Surface Conditions
Solution Annealed and Pickled
Used for many industrial stainless steel pipe applications where appropriate heat treatment and oxide removal are required.
Descaled Surface
Scale removal may be specified according to the manufacturing process and product requirements.
Polished Surface
Mechanical polishing can be specified for selected tubing applications requiring controlled appearance or surface roughness.
Cleaned and Passivated Surface
Cleaning and chemical passivation can be specified using applicable procedures such as ASTM A380/A380M and ASTM A967/A967M.
The surface treatment must be compatible with the selected stainless steel grade and intended service.
Pipe End Configurations
Plain End (PE)
Square-cut pipe ends suitable for specified welding, fabrication or further processing.
Beveled End (BE)
Prepared ends for butt-welded piping systems according to the applicable fabrication requirements.
Threaded End
Threaded connections may be considered where the material, pipe wall and connection standard permit their use.
Grooved End
Grooved connections require confirmation of the pipe dimensions and compatibility with the selected mechanical coupling system.
Custom Processing Options
Depending on grade, dimensions and project requirements, the following operations may be evaluated:
Custom cutting lengths
End facing and deburring
Bevel preparation
Surface finishing
Pipe marking
Material segregation
Project-specific packaging
Inspection and documentation preparation
Custom manufacturing feasibility is reviewed against the purchase specification.
Industrial Applications of UNS Stainless Steel Pipes
Oil and Gas Processing
Stainless steel and duplex pipe materials are used in selected production facilities, chemical injection systems, processing equipment and corrosion-resistant piping networks.
Material selection must comply with the applicable project specifications and operating environment.
Chemical and Petrochemical Processing
Austenitic and high-alloy stainless steel pipes are used in equipment handling selected corrosive chemicals and industrial fluids.
Grade selection requires evaluation of chemical concentration, contaminants and temperature.
Desalination and Water Treatment
Duplex, super duplex and high-alloy austenitic stainless steels are considered for demanding chloride-containing water treatment environments.
Appropriate corrosion assessment is essential for seawater or brine exposure.
Heat Exchangers and Thermal Equipment
Stainless steel tubes are widely used in shell-and-tube heat exchangers, condensers, evaporators and thermal processing equipment.
The governing tubing standard, dimensions, heat-transfer requirements and service conditions must be specified.
Food and Sanitary Processing
Austenitic stainless steel tubing is used in hygienic processing equipment where material compatibility, surface finish and cleanability are important.
Sanitary applications may require additional surface roughness, dimensional, cleaning and inspection requirements.
Power Generation
Stainless steel and selected heat-resistant alloys are used in thermal equipment, plant piping and energy-related systems.
Material selection must consider temperature-dependent strength, oxidation behavior and the applicable engineering code.
Industrial Fabrication and OEM Equipment
UNS stainless steel pipes and tubes can be supplied for equipment manufacturing, fabricated assemblies, skids and other engineered industrial components.
Dimensional tolerances and fabrication requirements should be defined before production.
Inspection and Quality Assurance
Xi'an Dongmeng Group Co., Ltd. supports project-specific inspection and material documentation requirements for industrial stainless steel pipe procurement.
Quality requirements are reviewed according to the selected material grade, manufacturing process and governing specification.
Chemical Composition Verification
Chemical composition can be verified using material test records and appropriate analytical methods.
Positive Material Identification (PMI) may be specified as an additional alloy-verification measure.
PMI should not be treated as a complete replacement for laboratory chemical analysis, particularly for elements that the selected PMI method cannot reliably measure.
Mechanical Testing
Mechanical tests may include:
Tensile testing
Yield strength verification
Elongation measurement
Hardness testing where applicable
Flattening or flaring tests where required
Additional project-specific mechanical tests
Testing requirements depend on the applicable pipe or tube standard.
Non-Destructive Examination
Project requirements may include:
Ultrasonic Testing (UT)
Eddy Current Testing (ET)
Radiographic Testing (RT)
Liquid Penetrant Testing (PT)
Hydrostatic Testing
Other permitted or specified examination methods
Each method is selected according to the product standard, manufacturing process and purchase-order requirements.
Duplex and Super Duplex Quality Control
For duplex and super duplex stainless steel pipes, additional attention may be required for:
Solution annealing and cooling conditions
Weld heat input
Phase balance
Detrimental intermetallic phases
Impact toughness where specified
Localized corrosion resistance
ASTM A923 and other applicable test methods may be specified where relevant to the selected duplex grade and project requirements.
Corrosion Testing
Special corrosion testing may be required for critical applications.
Examples include:
ASTM G48: Selected pitting and crevice corrosion test methods.
ASTM A262: Practices for evaluating susceptibility to intergranular attack in austenitic stainless steels.
ASTM A923: Methods for detecting detrimental intermetallic phases in applicable duplex stainless steels.
Such tests are not automatically required for every product. Their applicability, test conditions and acceptance criteria should be agreed before ordering.
Material Traceability and Inspection Documents
Inspection documentation may include:
Material Test Certificate
Heat Number
Chemical Composition Report
Mechanical Test Results
Dimensional Inspection Report
NDT Reports
Heat Treatment Records, where applicable
Third-Party Inspection Reports, when specified
EN 10204 Type 3.1 inspection documents can be requested when required by the purchase specification.
Material identification and traceability should be maintained throughout the applicable manufacturing and delivery process.
Manufacturing, Supply and Delivery Options
Industrial stainless steel pipe procurement often requires more than a basic material grade and diameter.
Our procurement support covers coordination of material specifications, manufacturing routes, dimensional requirements and inspection documentation.
Supply Considerations
Material Grades
Standard austenitic stainless steels, duplex grades, super duplex grades and selected specialty alloys.
Product Forms
Seamless pipe, longitudinally welded pipe, specified electric-fusion-welded pipe and industrial tubing.
Dimensional Requirements
NPS and pipe schedule dimensions, OD × WT specifications, standard lengths and project-specific cutting.
Manufacturing Requirements
Specified heat treatment, dimensional tolerances, surface condition and end preparation.
Inspection Requirements
Standard inspection and additional agreed testing for critical applications.
Project Documentation
Material certificates, inspection reports, packing lists and other agreed shipping documents.
MOQ and Lead Time
Minimum order quantity and delivery schedule depend on material grade, manufacturing route, dimensions, inspection requirements and order volume.
Specialty alloys and non-standard sizes may require additional manufacturing or testing time.
Please submit your requirements for a project-specific quotation.
Packaging and International Shipping
Appropriate packaging helps protect stainless steel pipes during handling, storage and international transport.
Packaging methods can be selected according to product dimensions, surface condition, destination and customer requirements.
Available packaging arrangements may include:
Secured pipe bundles
Protective end caps
Surface protection for polished tubing
Wooden cases or crates where suitable
Export packing for international shipment
Identification labels and heat-number markings
Project-specific packing lists
For corrosion-resistant stainless steel materials, handling and packaging should minimize carbon steel contamination and unnecessary surface damage.
Packaging and shipping requirements should be confirmed before order execution.
Why Choose Xi'an Dongmeng Group Co., Ltd.?
Material Selection Support
We help industrial buyers compare UNS stainless steel grades according to corrosion environments, mechanical requirements and project specifications.
Multi-Grade Procurement
Our product coverage includes common austenitic stainless steels and specialized duplex, super duplex and high-alloy materials.
Standards-Based Specification Review
We assist buyers in defining material grades, ASTM/ASME requirements, dimensional standards and inspection specifications.
Customized Pipe Requirements
Non-standard pipe dimensions, manufacturing methods, surface conditions and processing requirements can be evaluated according to technical feasibility.
Quality Documentation Support
Material traceability, inspection records and additional testing requirements can be coordinated according to the purchase order.
Global B2B Supply
We support international material procurement for distributors, industrial contractors, equipment manufacturers and engineering projects.
Our focus is to help customers obtain stainless steel piping materials that match their specified technical and commercial requirements.
Request a Quote for UNS Stainless Steel Pipe
Looking for UNS stainless steel pipes for an industrial project?
Xi'an Dongmeng Group Co., Ltd. can review your material specifications and help identify suitable supply options.
For an accurate quotation, please provide the following information:
| Required Information | Example |
|---|---|
| UNS Grade | S31603 / S32205 / S32750 |
| Product Standard | ASTM A312 / ASTM A790 |
| Manufacturing Method | Seamless / Welded |
| Pipe Size | NPS 2 / OD 60.3 mm |
| Wall Thickness | SCH 40S / 3.91 mm |
| Length | 6 m / Custom Length |
| Surface Condition | Annealed and Pickled |
| Inspection | MTC 3.1 / PMI / UT |
| Quantity | Pieces / Meters / Weight |
| Destination | Country and Delivery Port |
Request a Quote: Submit your required UNS grade, dimensions and quantity.
Technical Review: Send your project specification or engineering drawings.
Material Documentation: Request available inspection and material certificate information.
Sample Evaluation: Discuss sample availability for the specified grade and dimensions.
Frequently Asked Questions About UNS Stainless Steel Pipe
Q1. What does UNS mean in stainless steel pipe specifications?
UNS stands for Unified Numbering System. It identifies the chemical alloy designation but does not independently define all requirements for manufacturing, mechanical performance, dimensions or inspection.
A complete pipe purchase specification must identify the applicable product and dimensional standards.
Q2. What is the difference between UNS S30403 and S31603?
UNS S30403 identifies 304L stainless steel, while UNS S31603 identifies 316L stainless steel.
316L contains molybdenum and generally offers improved localized corrosion resistance compared with 304L in many relevant environments.
The correct choice depends on operating conditions and corrosion requirements.
Q3. Is UNS S32205 the same as duplex 2205?
UNS S32205 is a commonly specified designation for 2205 duplex stainless steel.
UNS S31803 is also associated with 2205, but the chemical composition requirements differ.
The exact UNS designation specified in the purchase order should be verified.
Q4. What is the difference between UNS S31803 and S32750?
UNS S31803 is a duplex stainless steel designation associated with 2205.
UNS S32750 identifies a higher-alloyed super duplex stainless steel commonly known as 2507.
S32750 generally provides higher strength and greater localized corrosion resistance in suitable environments, but selection depends on the complete service requirements.
Q5. What ASTM standard applies to UNS S31603 stainless steel pipe?
ASTM A312/A312M is a common specification for austenitic stainless steel process pipe, including applicable TP316L products.
Other standards may apply depending on whether the product is pipe, general-service tubing, heat-exchanger tubing or another specialized product form.
Q6. What ASTM standard applies to duplex stainless steel pipe?
ASTM A790/A790M covers seamless and welded ferritic-austenitic stainless steel pipe.
ASTM A789/A789M covers duplex stainless steel tubing.
The correct standard depends on the intended product form and project specification.
Q7. Can UNS S31603 stainless steel pipe be used in seawater?
316L may be unsuitable for direct or demanding seawater exposure because of the risk of localized corrosion and other degradation mechanisms.
Material selection should consider chloride concentration, temperature, crevices, oxygen content, flow conditions and service duration.
Duplex, super duplex or high-alloy austenitic grades may be considered where supported by appropriate engineering assessment.
Q8. What is the difference between seamless and welded UNS stainless steel pipe?
Seamless pipe does not contain a longitudinal weld seam.
Welded pipe is manufactured using an approved welding process and may require additional weld-specific inspection or heat treatment.
Both forms can satisfy industrial applications when manufactured and accepted under the appropriate standards.
Q9. What is the difference between SCH 10S and SCH 40S?
SCH 10S and SCH 40S identify stainless steel pipe wall thickness series under ASME B36.19.
For a given NPS, SCH 40S generally has a thicker nominal wall than SCH 10S.
The actual thickness depends on the nominal pipe size.
Q10. Is UNS N08904 the same as 904L stainless steel?
Yes. UNS N08904 is the designation commonly associated with 904L high-alloy austenitic stainless steel.
Its EN material number is 1.4539.
The designation should not be confused with an S-series number.
Q11. Can you provide EN 10204 3.1 certificates and third-party inspection?
EN 10204 Type 3.1 inspection documents and additional third-party inspection requirements can be discussed according to the selected product, manufacturing route and purchase specification.
Testing and documentation requirements should be confirmed before ordering.
Q12. How do I choose between 316L, 2205, 2507 and 254 SMO stainless steel pipe?
The appropriate grade depends on the corrosive environment, pressure, temperature, mechanical requirements and fabrication conditions.
316L is widely used for general corrosion-resistant piping.
2205 offers higher strength and generally improved resistance to certain chloride-related corrosion mechanisms.
2507 provides higher alloy content for more demanding environments.
254 SMO offers high localized corrosion resistance as a highly alloyed austenitic stainless steel.
A project-specific assessment is recommended before finalizing the material specification.
Contact Us – UNS Stainless Steel Pipe Supply
Xi'an Dongmeng Group Co., Ltd.
We provide material specification support and international procurement services for industrial stainless steel pipes and tubes.
Contact our team to discuss UNS material grades, pipe dimensions, applicable ASTM/ASME standards, inspection documentation and project delivery requirements.
Office Information
Company: Xi'an Dongmeng Group Co., Ltd.
Telephone: +86 15769214734
WhatsApp: +86 15769214734
Email: office@dongmjd.com
Office Address: Room 4107, Runfeng Building, Sanqiao New Street, Weiyang District, Xi'an City, Shaanxi Province, China.
Send your RFQ, material specification or technical drawings for a project-specific quotation.
Xi'an Dongmeng Group Co., Ltd. is one of the leading uns stainless steel pipe manufacturers and suppliers in China. We warmly welcome you to buy or wholesale cheap uns stainless steel pipe in stock here from our factory. All customized products are with high quality and competitive price. For free sample, contact us now.
UNS S38815 Stainless Steel Pipe And Tube, UNS S44735 Stainless Steel Tube

