1.5 Inch Stainless Steel Pipe

1.5 Inch Stainless Steel Pipe
Details:
Product Options: NPS 1-1/2 Pipe / 1.5-Inch OD Tube
Pipe OD: 48.26 mm
Tube OD: 38.10 mm
Pipe Schedules: 5S / 10S / 40S / 80S
Grades: 304 / 304L / 316L / 321 / 310S / 2205
Pipe Standards: ASTM A312 / ASTM A790
Tube Standards: ASTM A269 / A270 / A213 / A554 / A789
Manufacturing: Seamless / Welded
Surface: Pickled / BA / Polished / Electropolished
Processing: Cutting / Beveling / Threading / Grooving / Bending
Testing: Hydrostatic / ET / UT / PMI
Send Inquiry
Description
Send Inquiry

Xi'an Dongmeng Group Co., Ltd. is one of the most reliable manufacturers and suppliers of 1.5 inch stainless steel pipe in China, also supports customized service. With abundant experience, we warmly welcome you to wholesale cheap products in stock here and get free sample from our factory. For price consultation, contact us.

 

1-12 Inch Stainless Steel Pipe

1-1/2 Inch Stainless Steel Pipe and 1.5 Inch OD Tube

Dongmeng Group supplies both NPS 1-1/2 stainless steel pipe and 1.5-inch outside-diameter stainless steel tubing for process piping, water systems, chemical equipment, food-processing machinery, heat exchangers, architectural fabrication and OEM components.

These products are frequently confused, but they have different outside diameters and ordering methods:

NPS 1-1/2 pipe: 1.900-inch / 48.26 mm actual outside diameter

1.5-inch OD tube: 1.500-inch / 38.10 mm actual outside diameter

Customers should identify whether they require a nominal pipe size or an actual tube outside diameter before requesting a quotation.

 

1-1/2 Inch Stainless Steel Pipe Overview

 

Pipe Size: NPS 1-1/2 / DN 40

Standard Pipe OD: 48.26 mm / 1.900 inch

Tube OD Option: 38.10 mm / 1.500 inch

Pipe Schedules: 5S / 10S / 40S / 80S

Common Grades: 304 / 304L / 316 / 316L / 321 / 310S

Duplex Options: S31803 / S32205 according to the applicable duplex standard

Manufacturing: Seamless / Straight-Seam Welded / Cold Worked

Surface Options: Pickled / Bright Annealed / Polished / Brushed / Electropolished

Lengths: 3 / 5.8 / 6 / 11.8 / 12 m or cut to length

Ends: Plain / Beveled / Threaded / Grooved / Machined

Testing: Hydrostatic / Eddy Current / Ultrasonic / PMI

Documents: EN 10204 3.1 MTC / NDT Report / Dimensional Report

Processing: Cutting / Beveling / Threading / Grooving / Bending / Drilling

Important: 1.5 Inch Pipe Is Not 38.1 mm OD

In a pipe-size system, the nominal size is not normally the actual outside diameter.

ASME B36.19 standardizes dimensions for welded and seamless wrought stainless steel pipe. For NPS sizes of 12 inches and below, the outside diameter is numerically larger than the nominal pipe size.

Therefore:

Commercial Description Actual Outside Diameter Ordering Method
NPS 1-1/2 Stainless Steel Pipe 48.26 mm / 1.900 in. NPS + Schedule
1.5-Inch OD Stainless Steel Tube 38.10 mm / 1.500 in. Actual OD × Wall
38.1 mm Stainless Steel Tube 38.10 mm OD × Wall × Length
DN 40 Stainless Steel Pipe 48.26 mm DN / NPS + Schedule

The current ASME B36.19-2022 standard covers standardized dimensions for welded and seamless stainless steel piping.

NPS 1-1/2 Stainless Steel Pipe Dimensions

All common schedules maintain the same 48.26 mm outside diameter. Increasing the schedule increases the wall thickness and reduces the internal diameter.

Schedule Outside Diameter Wall Thickness Approximate Inside Diameter Approximate Weight
Sch 5S 48.26 mm 1.65 mm 44.96 mm 1.92 kg/m
Sch 10S 48.26 mm 2.77 mm 42.72 mm 3.14 kg/m
Sch 40S 48.26 mm 3.68 mm 40.90 mm 4.09 kg/m
Sch 80S 48.26 mm 5.08 mm 38.10 mm 5.47 kg/m

The wall dimensions follow the ASME B36.19 stainless steel pipe dimensional system. Approximate internal diameters are calculated from the nominal OD and wall thickness. Approximate weights use a reference stainless steel density and should not replace the agreed mill or shipment weight.

A notable point is that 38.1 mm is approximately the inside diameter of NPS 1-1/2 Sch 80S pipe, not the outside diameter of every 1.5-inch pipe.

1.5-Inch OD Stainless Steel Tube Dimensions

When the buyer requests an actual 1.5-inch outside diameter, the product is normally ordered as tubing.

Actual Tube OD Wall Thickness Approximate Inside Diameter
38.10 mm 0.9 mm 36.30 mm
38.10 mm 1.2 mm 35.70 mm
38.10 mm 1.5 mm 35.10 mm
38.10 mm 2.0 mm 34.10 mm
38.10 mm 2.5 mm 33.10 mm
38.10 mm 3.0 mm 32.10 mm

Other wall thicknesses can be reviewed according to the material grade, manufacturing route, applicable standard and quantity.

Tube should normally be ordered as:

38.10 mm OD × Wall Thickness × Length

Example:

38.10 × 1.50 × 6000 mm

Choosing the Correct Product Standard

The correct standard depends on whether the product is a pressure pipe, general-service tube, sanitary tube, heat-exchanger tube or mechanical decorative tube.

Application Recommended Standard Product Type
Austenitic Process Pipe ASTM A312/A312M-25 Seamless, welded or heavily cold-worked pipe
Duplex Process Pipe ASTM A790/A790M-24 Seamless or straight-seam welded duplex pipe
General Austenitic Tube ASTM A269/A269M-25 Seamless or welded general-service tubing
Duplex General-Service Tube ASTM A789/A789M-24 Seamless or welded duplex tubing
Sanitary Tube ASTM A270/A270M-24 Seamless, welded or heavily cold-worked sanitary tubing
Boiler and Heat-Exchanger Tube ASTM A213/A213M-25 Seamless heat-transfer tubing
Mechanical or Decorative Tube ASTM A554-26 Welded mechanical tubing
Stainless Pipe Dimensions ASME B36.19-2022 NPS and schedule dimensions

ASTM A312/A312M-25 covers seamless, straight-seam welded and heavily cold-worked welded austenitic stainless steel pipe intended for high-temperature and general corrosive service. Each pipe is subject to a hydrostatic or nondestructive electric test.

ASTM A269/A269M-25 covers nominal-wall-thickness austenitic stainless tubing for general corrosion-resistant and low- or high-temperature service.

ASTM A270/A270M-24 is intended for stainless steel sanitary tubing used in dairy and food applications with specified surface finishes; pharmaceutical-quality supplementary requirements can also be requested.

ASTM A554-26 applies to welded mechanical tubing for ornamental, structural, exhaust and other non-piping mechanical applications.

ASTM A213/A213M-25 applies to seamless boiler, superheater and heat-exchanger tubing rather than general process pipe.

Available Stainless Steel Grades

Grade Main Characteristic Typical Applications
TP304 General corrosion resistance and fabrication Water, air, equipment and general process piping
TP304L Lower carbon for welded systems Fabricated piping and equipment
TP316 Molybdenum-alloyed corrosion resistance Chemical and humid-environment systems
TP316L Low-carbon molybdenum grade Welded chemical, food and process piping
TP321 Titanium-stabilized grade Selected elevated-temperature systems
TP310S High-chromium and high-nickel heat-resistant grade Furnace and high-temperature gas systems
S31803 / S32205 Duplex 2205 Chloride-containing and higher-strength process systems

ASTM A312 is an austenitic stainless steel pipe standard. Duplex 2205 pipe should be ordered to ASTM A790/A790M, which covers seamless and straight-seam welded ferritic-austenitic stainless steel pipe for corrosive service.

Grade 304 or 304L

304 is the general-purpose selection for many water, architectural and industrial applications.

304L is commonly preferred for extensively welded systems because its lower carbon content helps reduce sensitization risk in weld heat-affected zones.

Grade 316 or 316L

316 and 316L contain molybdenum, which improves resistance to localized corrosion compared with conventional 304 in many chloride-containing environments.

However, 316L should not be described as universally seawater-proof. Actual suitability depends on chloride concentration, temperature, flow, crevices, deposits, oxygen conditions and cleaning.

Duplex 2205

Duplex 2205 offers higher strength than conventional annealed austenitic stainless steel and improved resistance to chloride stress-corrosion cracking.

It requires controlled heat treatment and welding procedures and should be ordered using ASTM A790 for pipe or ASTM A789 for tube.

Pipe vs Tube

Item Stainless Steel Pipe Stainless Steel Tube
Primary Ordering Method NPS + Schedule Actual OD × Wall
Example NPS 1-1/2 Sch 40S 38.1 × 1.5 mm
Standard OD for "1-1/2" 48.26 mm 38.10 mm when 1.5-inch OD is specified
Main Application Process and utility piping Equipment, heat transfer, sanitary and mechanical use
Dimensional Standard ASME B36.19 Product or customer specification
Wall Identification Schedule Direct wall thickness
End Options Beveled, threaded, grooved or plain Plain, polished, orbital-weld-ready or machined

Do not use "pipe" and "tube" interchangeably in the quotation without confirming the intended dimensions.

Seamless vs Welded Stainless Steel Pipe

Item Seamless Welded
Longitudinal Weld None Present
Manufacturing Route Pierced or extruded hollow, then finished Flat strip formed and longitudinally welded
Dimensional Consistency Depends on process and cold finishing Highly consistent dimensions possible
Surface Options Pickled or polished Pickled, polished and weld-finished
Commercial Cost Commonly higher Commonly more economical
Typical Selection Project-specific critical service and heavy walls General process, sanitary and structural applications
Pressure Capability Requires engineering calculation Requires engineering calculation

Seamless pipe is not automatically rated for higher pressure than every welded pipe.

Pressure capacity depends on:

Material grade

Supplied mechanical properties

Actual minimum wall thickness

Wall-thickness tolerance

Design temperature

Corrosion allowance

Applicable piping code

Weld quality and construction factors

Fittings and end connections

Cyclic loading

Properly manufactured and tested ASTM A312 welded pipe can be used in pressure and corrosive-service piping when permitted by the project design code.

Surface Finish Options

Pickled and Passivated

Standard industrial surface for process piping and chemical systems.

Bright Annealed

Smooth, bright heat-treated surface suitable for clean-service tubing and equipment fabrication.

Mechanically Polished

Available in multiple abrasive finishes according to the required appearance or internal roughness.

Electropolished

Electrochemical finishing can be supplied for selected sanitary and high-purity tubing when specified.

Brushed or Mirror Polished

Primarily used for architectural, decorative and mechanical ASTM A554 tubing rather than ordinary process pipe.

For sanitary tubing, specify:

Internal surface roughness

External finish

Longitudinal or circumferential polishing

Weld-bead condition

Electropolishing requirement

Cleaning and packaging procedure

ASTM A270 allows mill, mechanically polished and electropolished sanitary-tube surfaces and permits maximum roughness-average requirements to be specified.

Sanitary and Food-Processing Applications

A 304L or 316L material certificate alone does not make a tube suitable for sanitary service.

A sanitary specification should also identify:

ASTM A270 requirement

Finished outside diameter

Wall thickness

Internal surface roughness

Weld-bead finishing

Heat-treatment condition

Electropolishing if required

Cleaning and passivation

End preparation

Packaging and end caps

Applicable hygienic equipment standard

ASTM A270 is intended for dairy and food-industry sanitary tubing with special surface finishes. Pharmaceutical-quality supplementary requirements may be requested.

Pressure Design Notice

 

A schedule number does not independently determine a safe working pressure.

For example, Sch 80S has a greater nominal wall thickness than Sch 10S, but allowable pressure still depends on the material's allowable stress at the design temperature and the applicable construction code.

The piping engineer should consider:

ASME B31.1, B31.3 or other governing code

Material specification

Design pressure

Design temperature

Minimum required wall

Manufacturing tolerance

Corrosion and erosion allowance

Branch connections

Bending thinning

Thread or groove allowance

Joint design

Hydrostatic test pressure

Fatigue and thermal cycling

Dongmeng Group supplies material and inspection documentation but does not assign a universal pressure rating to all 1-1/2-inch pipes.

Typical Applications

NPS 1-1/2 Pipe

Common applications include:

Chemical-process piping

Industrial water systems

Compressed-air lines

Steam and condensate systems

Utility piping

Pump and valve connections

Pharmaceutical-process piping

Marine equipment piping

Wastewater systems

Heat-transfer systems

1.5-Inch OD Tube

Common applications include:

Food-processing equipment

Dairy systems

Pharmaceutical skids

Heat exchangers

Instrumentation

Handrails

Furniture

Exhaust systems

Equipment frames

Architectural components

OEM fabricated assemblies

The application name alone is insufficient for material selection. Buyers should provide the fluid, temperature, pressure, chloride exposure and required cleaning method.

Custom Processing Services

Dongmeng Group can supply full-length pipe or processed components according to drawings.

Available services include:

Fixed-length cutting

End facing

Bevel preparation

Threading

Roll or cut grooving

CNC drilling

Slot processing

Pipe bending

Tube bending

Orbital-weld preparation

Internal and external polishing

Electropolishing coordination

Pickling and passivation

Custom marking

Fabricated spool assemblies

Processing feasibility depends on the grade, dimensions, schedule, bending radius and finished tolerance.

Inspection and Quality Assurance

Inspection can be arranged according to the specified product standard and inspection and test plan.

Available controls include:

Material grade and heat-number verification

Mill Test Certificate review

Positive Material Identification

Outside-diameter measurement

Wall-thickness measurement

Ovality and straightness inspection

Length and end inspection

Surface-condition inspection

Weld-seam inspection

Internal roughness measurement

Hydrostatic testing

Eddy-current testing

Ultrasonic testing

Tensile and flattening testing

Third-party inspection

ASTM A312, A269, A270, A790 and A789 contain product-specific hydrostatic or nondestructive examination requirements. The exact inspection method should be identified in the purchase order.

Available Documentation

EN 10204 3.1 Mill Test Certificate

Chemical composition report

Mechanical test report

Hydrostatic test report

Eddy-current report

Ultrasonic test report

PMI report

Surface-roughness report

Dimensional inspection report

Heat-treatment record

Certificate of Conformity

Third-party inspection report

Heat-number packing list

Documentation requirements must be confirmed before production.

Packaging and Traceability

Standard export packaging may include:

Plastic end caps

Waterproof wrapping

Individual sleeves for polished tubes

Steel-strapped bundles

Reinforced wooden cases

Foam or paper separators

Desiccant for sea shipment

Grade and dimension labels

Heat-number identification

Customer-specific shipping marks

Polished and sanitary tubes should be individually protected to reduce surface damage and internal contamination.

Stainless Steel Pipe Price

 

The price of 1-1/2-inch stainless steel pipe depends on:

NPS pipe or 1.5-inch OD tube

Stainless steel grade

Seamless or welded manufacturing

Schedule or direct wall thickness

Length and quantity

Surface finish

Internal roughness

Heat treatment

End preparation

Additional processing

NDT requirements

Certification

Packaging

Freight and Incoterms

A complete quotation should clearly identify:

Grade + Standard + Size + Wall + Length + Finish + Testing + Processing + Delivery Terms

Why Choose Dongmeng Group?

Dongmeng Group provides stainless steel pipe and tube supply, processing, inspection and international delivery support.

Customers can receive:

Correct pipe-versus-tube dimension review

Austenitic and duplex grades

Seamless and welded options

Sch 5S through Sch 80S dimensions

General, sanitary and mechanical tubing

Fixed-length and end processing

Surface polishing and passivation

MTC and NDT documentation

Third-party inspection support

Export seaworthy packaging

FOB, CFR, CIF and DDP delivery options

Request a Technical Quote

For an accurate quotation, please provide:

Pipe or tube

NPS or actual outside diameter

Schedule or wall thickness

Stainless steel grade

Product standard

Seamless or welded

Length

Quantity

Surface finish

Internal roughness

End preparation

Operating fluid

Design pressure

Design temperature

Testing requirement

Required documentation

Destination port or delivery address

Company: Dongmeng Group

Email: office@dongmjd.com

Phone / WhatsApp: +86 157 6921 4734

 

Frequently Asked Questions

 

Is 1.5-inch stainless steel pipe 38.1 mm outside diameter?

Not when it is ordered as NPS 1-1/2 pipe. NPS 1-1/2 pipe has an actual outside diameter of 48.26 mm. A tube specifically ordered as 1.5-inch OD has an actual outside diameter of 38.10 mm.

Why is NPS 1-1/2 pipe larger than 1.5 inches?

NPS is a nominal pipe designation rather than a direct measurement of outside diameter. ASME B36.19 assigns NPS 1-1/2 pipe an outside diameter of 1.900 inches.

Does the outside diameter change with the schedule?

No. All standard NPS 1-1/2 schedules use the same 48.26 mm outside diameter. The wall thickness and internal diameter change.

What are the wall thicknesses for NPS 1-1/2 pipe?

Common stainless schedules include 1.65 mm for Sch 5S, 2.77 mm for Sch 10S, 3.68 mm for Sch 40S and 5.08 mm for Sch 80S.

Which standard should I use for process piping?

ASTM A312/A312M is commonly specified for austenitic stainless steel process pipe. ASTM A790/A790M is used for duplex stainless steel process pipe.

Which standard should I use for general tubing?

ASTM A269/A269M covers seamless and welded austenitic stainless steel tubing for general corrosion-resistant and temperature service.

Which standard should I use for food or dairy tubing?

ASTM A270/A270M should be considered for sanitary tubing with specified surface finishes. Final sanitary suitability also depends on equipment design, weld finishing and cleaning requirements.

Which standard applies to decorative polished tube?

ASTM A554 applies to welded mechanical tubing used for ornamental, structural and similar applications.

Can 2205 duplex be supplied to ASTM A312?

No. Duplex 2205 pipe should normally be specified to ASTM A790/A790M, while duplex tubing is commonly specified to ASTM A789/A789M.

Is seamless pipe always stronger than welded pipe?

No. Strength and pressure capability depend on material properties, wall thickness, manufacturing quality, design temperature and the governing piping code.

Is 316L suitable for seawater?

316L offers better chloride resistance than 304 in many environments, but it is not immune to seawater pitting or crevice corrosion. Temperature, oxygen, deposits, crevices and flow conditions must be evaluated.

Can you supply cut and beveled pipe?

Yes. Fixed-length cutting, facing, beveling, threading, grooving, drilling, bending and drawing-based processing are available.

What information is most important when requesting a quote?

First confirm whether you need NPS 1-1/2 pipe with 48.26 mm OD or 1.5-inch OD tubing with 38.10 mm OD. Then provide the grade, schedule or wall thickness, length, quantity, finish and applicable standard.

 

 

 

 

 

 

 

Hot Tags: 1-1/2 inch stainless steel pipe, 1.5 inch stainless steel tube, 304 stainless steel pipe 1.5 inch, 316L stainless steel pipe, NPS 1-1/2 stainless steel pipe, 48.3 mm stainless steel pipe, Sch 40 stainless steel pipe, 440C Stainless Steel

Send Inquiry