Xi'an Dongmeng Group Co., Ltd. is one of the most reliable manufacturers and suppliers of astm a653 galvanized steel sheet supplier | g60 & g90 in China, also supports customized service. With abundant experience, we warmly welcome you to wholesale cheap products in stock here and get free sample from our factory. For price consultation, contact us.

ASTM A653 Galvanized Steel Sheet Supplier – G60 & G90
Hot-Dip Galvanized Steel Sheets for Construction, HVAC, Roll Forming & Industrial Fabrication
Xi'an Dongmeng Group Co., Ltd. is a China-based ASTM A653 galvanized steel sheet supplier, providing zinc-coated steel sheets for distributors, construction contractors, steel service centers, and industrial manufacturers worldwide.
Our galvanized steel sheets can be supplied to ASTM A653/A653M specifications in commercial, forming, and structural steel grades, with G30, G60, G90, and other coating designations available for quotation. We support customized sheet thicknesses, widths, cut lengths, surface finishes, and export packaging to meet specific manufacturing and project requirements.
Whether you need ASTM A653 CS Type B G90 galvanized sheet, structural-grade galvanized sheet, or custom-cut 4×8 steel sheets, Dongmeng Group helps international buyers coordinate material specifications, quality documentation, and bulk procurement.
What Is ASTM A653 Galvanized Steel Sheet?
ASTM A653/A653M is a specification covering steel sheet coated with zinc or zinc-iron alloy through a continuous hot-dip coating process. It applies to products supplied in both coil form and cut lengths.
For galvanized steel sheet, a protective zinc coating is applied to the steel substrate to improve resistance to atmospheric corrosion.
The zinc coating provides two forms of protection:
Barrier Protection
The zinc layer separates the underlying steel from direct contact with moisture and oxygen.
Sacrificial Protection
Zinc preferentially corrodes in the presence of exposed steel, helping protect small scratches and cut edges within the limits of the coating system.
Unlike a single steel grade, ASTM A653 covers multiple substrate designations intended for different forming, mechanical, and structural requirements.
A complete purchasing specification should identify:
Applicable ASTM standard and edition
Base steel designation and grade
Zinc coating designation
Sheet thickness, width, and length
Surface quality and treatment
Dimensional tolerances
Inspection and certification requirements
Example Purchase Specification:
ASTM A653/A653M CS Type B, G90, 1.00 mm × 1219 mm × 2438 mm, hot-dip galvanized, cut-to-length sheet, with agreed surface treatment and mill certification.
ASTM A653 Galvanized Steel Sheet Specifications
The following table provides indicative procurement options for international customers.
| Parameter | Specification |
|---|---|
| Product Type | Hot-Dip Galvanized Steel Sheet |
| Main Standard | ASTM A653/A653M |
| General Requirements | ASTM A924/A924M |
| Steel Designations | CS, FS, DDS, SS, HSLAS |
| Selected Grades | CS Type B, SS Grade 33, SS Grade 40, SS Grade 50 |
| Coating Designations | G30–G140; heavier grades on request |
| Coating Type | Zinc (G) |
| Thickness | 0.30–3.00 mm (0.012–0.118 in) |
| Width | 600–1500 mm (23.62–59.06 in) |
| Sheet Length | Custom cut-to-length |
| Common Sizes | 36×96, 48×96, 48×120 in |
| Surface Finish | Regular / Minimized Spangle |
| Surface Treatment | Passivated, Oiled, Untreated |
| Edge Condition | Mill Edge / Trimmed Edge |
| Processing | Cutting, Leveling, Slitting, Sheet Preparation |
| Inspection | Coating Mass, Dimensions, Surface, Mechanical Properties |
| Packaging | Protective Wrapping / Steel Straps / Pallets |
Final dimensional tolerances must comply with the agreed standard, steel grade, and specified sheet dimensions.
ASTM A653 Steel Grades and Material Selection
Choosing the correct steel grade is as important as selecting the zinc coating.
ASTM A653 galvanized sheets can be supplied in several steel categories, each designed for different fabrication requirements.
Commercial Steel – CS Type A, B, and C
Commercial Steel is generally selected for products requiring standard bending and fabrication operations.
Typical applications:
HVAC ductwork
General sheet metal products
Equipment covers
Metal cabinets
Roofing accessories
CS Type B is a common choice for general-purpose galvanized steel sheet fabrication.
Forming Steel – FS
Forming Steel is suitable for applications requiring improved forming characteristics compared with general-purpose commercial steel.
Typical applications:
Formed sheet metal components
Fabricated panels
Moderate forming operations
Selected industrial housings
Deep Drawing Steel – DDS
Deep Drawing Steel is intended for more demanding forming operations where higher ductility is required.
Typical applications:
Drawn components
Formed enclosures
Selected appliance parts
Specialized industrial components
Structural Steel – SS
Structural Steel grades provide specified mechanical properties for applications where strength is a primary design consideration.
| ASTM A653 Grade | Minimum Yield Strength | Minimum Tensile Strength | Typical Application |
|---|---|---|---|
| SS Grade 33 (230) | 230 MPa / 33 ksi | 310 MPa / 45 ksi | Light structural components |
| SS Grade 37 (255) | 255 MPa / 37 ksi | 360 MPa / 52 ksi | Framing and formed sections |
| SS Grade 40 (275) | 275 MPa / 40 ksi | 380 MPa / 55 ksi | Structural profiles and panels |
| SS Grade 50 (340), Class 1 | 340 MPa / 50 ksi | 450 MPa / 65 ksi | Higher-strength formed components |
Representative minimum mechanical properties for the listed structural grades. Final requirements, including elongation and class designation, must be verified against the applicable standard edition.
Which ASTM A653 Grade Should You Choose?
| Buyer Requirement | Suggested Grade Category |
|---|---|
| General sheet fabrication | CS Type B |
| More demanding cold forming | FS |
| Deep drawing operations | DDS |
| Structural sheet applications | SS Grade 33 / 40 / 50 |
| High-strength lightweight components | HSLAS, subject to engineering requirements |
Procurement Recommendation: Do not select a steel grade based only on tensile strength. Consider forming radius, elongation, structural loads, joining requirements, and the finished component geometry.
ASTM A653 G30, G60, G90 and G115 Zinc Coating Comparison
Zinc coating mass directly influences the amount of zinc available for corrosion protection.
ASTM A653 galvanized steel sheets are ordered using coating designations such as G30, G60, G90, and G115.
The coating designation refers to the specified minimum coating weight on both sides combined, not on each surface separately.
| ASTM Coating | Minimum Triple-Spot Coating Weight | Approximate Metric Designation | Selection Guidance |
|---|---|---|---|
| G30 | 0.30 oz/ft² | Z90 | Indoor applications with additional protection |
| G40 | 0.40 oz/ft² | Z120 | General-purpose indoor sheet products |
| G60 | 0.60 oz/ft² | Z180 | HVAC and selected fabricated components |
| G90 | 0.90 oz/ft² | Z275 | Roofing, exterior cladding and construction |
| G115 | 1.15 oz/ft² | Z350 | Applications requiring greater coating mass |
| G140 | 1.40 oz/ft² | Z450 | Higher-coating-mass project requirements |
The metric designations shown are approximate corresponding specification classes, not exact mass conversions or automatic certification equivalences.
G60 vs G90 Galvanized Steel Sheet
G60 galvanized sheet provides a specified minimum coating weight of 0.60 oz/ft² across both surfaces.
G90 galvanized sheet provides 0.90 oz/ft² across both surfaces.
G90 therefore specifies 50% more total coating weight than G60.
Choose G60 when:
The product will be installed indoors or in a controlled environment.
The application has moderate corrosion exposure.
A compatible paint or additional protective system will be used when required.
Choose G90 when:
Exterior exposure is more demanding.
Roofing, cladding, or construction specifications call for a heavier zinc coating.
The project requires the G90 coating designation.
A heavier coating does not eliminate the need to assess environmental corrosivity, edge protection, paint compatibility, or maintenance requirements.
ASTM A653 G90 vs EN 10346 Z275
ASTM A653 G90 and EN 10346 Z275 are widely referenced in galvanized steel procurement.
Both indicate closely comparable minimum total zinc coating mass across both sides of the sheet.
However, the standards may differ in:
Steel grade definitions
Chemical composition requirements
Mechanical testing requirements
Coating test procedures
Dimensional tolerances
Surface and delivery conditions
Important: G90 and Z275 should not be treated as fully interchangeable products without confirming the complete technical specification.
Dongmeng Group can assist buyers in reviewing cross-standard requirements when sourcing galvanized steel sheets for international projects.
Chemical Composition and Mechanical Properties
The steel substrate determines the chemical and mechanical characteristics of ASTM A653 galvanized steel sheet.
Chemical composition requirements vary according to the selected steel designation, grade, and class.
The principal elements evaluated include:
| Element | Technical Importance |
|---|---|
| Carbon (C) | Affects strength, hardness, weldability and formability |
| Manganese (Mn) | Contributes to strength and processing characteristics |
| Phosphorus (P) | Influences strength and ductility |
| Sulfur (S) | Controlled to limit undesirable effects on forming |
| Silicon (Si) | Influences steelmaking and coating behavior |
| Microalloying Elements | May be used in selected high-strength grades |
For commercial steel, some mechanical property values are typical rather than mandatory.
For structural grades, applicable strength and elongation requirements must be established according to the specific grade and class.
Customers requiring strict composition, weldability, or forming performance should provide their technical specifications for review before production.
Available ASTM A653 Galvanized Sheet Sizes
Dongmeng Group supports standard and customized cut-to-length galvanized steel sheets for distributors, construction projects, and industrial fabricators.
Common US Sheet Sizes
| Sheet Size | Metric Dimensions | Typical Application |
|---|---|---|
| 36 × 96 in | 914 × 2438 mm | General fabrication |
| 48 × 96 in | 1219 × 2438 mm | Standard 4×8 galvanized sheet |
| 48 × 120 in | 1219 × 3048 mm | HVAC and industrial cutting |
| 48 × 144 in | 1219 × 3658 mm | Longer fabricated panels |
| Custom Sizes | According to drawings | OEM and project supply |
Custom sheet dimensions depend on the available parent coil width, equipment capacity, cut-to-length process, and minimum order quantity.
Metric and Imperial Thickness
ASTM A653 galvanized steel sheets are commonly ordered using millimeters, decimal inches, or sheet metal gauge references.
For accurate procurement, buyers should specify nominal thickness in millimeters or decimal inches rather than relying on gauge numbers alone.
Thickness can refer to the coated sheet or base metal, depending on the agreed purchasing convention.
This distinction should be clarified when calculating tolerances, sheet weights, and fabrication clearances.
Surface Finish and Treatment Options
ASTM A653 galvanized sheet can be supplied with different zinc surface appearances and protective treatments.
Regular Spangle
Visible crystalline zinc patterns, commonly used where the finished surface appearance is not the main selection factor.
Minimized Spangle
A reduced spangle appearance suitable for applications requiring a more consistent surface.
Smooth Surface
Selected surface finishing processes may provide a more uniform appearance for exposed sheet metal components.
Chemical Treatment and Oiling
Surface treatment options can help reduce wet-storage staining during handling and transportation.
Customers intending to paint, powder coat, bond, or laminate the steel should specify the downstream process to ensure surface treatment compatibility.
Note: Spangle size is primarily an appearance characteristic. It does not independently define zinc coating mass or corrosion resistance.
Custom Processing and Fabrication Support
Different buyers require different sheet forms and dimensional tolerances.
Cut-to-Length Sheets
Galvanized steel coils can be leveled and cut to specified lengths for direct use in manufacturing operations.
Coil Slitting
Wider master coils can be slit into narrower widths for downstream fabrication, subject to equipment and material restrictions.
Custom Sheet Preparation
Depending on the processing route, customized sheet preparation may include:
Specified sheet dimensions
Edge trimming
Flatness requirements
Sheet stacking
Surface protection
Bundle labeling and traceability
OEM Fabrication Requirements
Buyers should provide technical drawings when special tolerances, punching, bending, stamping, or assembly operations are required.
The feasibility and commercial terms for additional processing are confirmed during quotation.
Industrial Applications of ASTM A653 Galvanized Steel Sheet
1. Roofing and Wall Cladding
ASTM A653 galvanized steel sheets are used for roll-formed roofing panels, wall cladding, and construction accessories.
For these applications, buyers should confirm coating weight, substrate strength, forming geometry, environmental exposure, and local building requirements.
2. HVAC Ductwork and Ventilation
Galvanized sheets are widely used for rectangular ducts, ventilation panels, equipment housings, and air distribution components.
Important purchasing factors include sheet thickness, formability, coating designation, surface condition, and dimensional accuracy.
3. Cold-Formed Steel Framing
Structural-grade galvanized steel sheets are used as feedstock for studs, tracks, and selected cold-formed structural profiles.
Specified yield strength, sheet thickness, structural design standards, and corrosion protection requirements must be verified.
4. Industrial Enclosures and Equipment Cabinets
Galvanized steel sheets are suitable for machinery covers, electrical equipment housings, protective panels, and industrial cabinets.
Customers may specify smooth surface appearance, cut-to-length tolerances, and painting compatibility.
5. Agricultural and Industrial Buildings
Galvanized steel sheets are used in cladding, storage buildings, agricultural facilities, and selected prefabricated building components.
Exposure to moisture, fertilizers, livestock environments, and industrial chemicals should be evaluated before material selection.
6. OEM Sheet Metal Components
Commercial and forming grades are suitable for selected stamped, bent, and fabricated products.
For OEM orders, provide component drawings, forming requirements, surface specifications, and expected production volume.
Corrosion Resistance and Service Environment
Galvanized steel protects the carbon steel substrate through a zinc coating.
However, its long-term performance depends on several factors:
Total zinc coating mass
Indoor or outdoor exposure
Atmospheric humidity and salt deposition
Industrial pollutants
Condensation and drainage
Cut edges and fabricated surfaces
Surface treatments and paint systems
Maintenance and installation conditions
For demanding coastal or industrial locations, material selection should be based on the project corrosion environment and the applicable design specifications.
A G90 coating designation alone does not establish a guaranteed number of years of corrosion-free service.
Additional paint systems or alternative metallic coatings may be needed for certain projects.
Inspection and Quality Assurance
Quality verification is an important part of international galvanized steel procurement.
Dongmeng Group can coordinate agreed inspection requirements and mill documentation for ASTM A653 galvanized sheet orders.
| Inspection Item | Verification |
|---|---|
| Steel Grade | Material identification and mill records |
| Chemical Composition | Heat analysis or certified mill data |
| Mechanical Properties | Tensile test results where specified |
| Zinc Coating Mass | Applicable coating mass test methods |
| Sheet Thickness | Dimensional measurement |
| Width and Length | Cut-size inspection |
| Surface Quality | Visual inspection of coating condition |
| Flatness | Applicable dimensional acceptance criteria |
| Coating Adhesion | Relevant bend or adhesion evaluation |
| Packaging | Bundle protection and labeling |
Material Test Certificates
Mill Test Certificates and inspection records can be arranged according to the agreed supply specification.
Where required and available, EN 10204 Type 3.1 inspection certification may be specified.
Third-Party Inspection
Independent inspection by SGS, BV, TÜV, or another agreed inspection provider can be coordinated before shipment.
The inspection scope, acceptance criteria, and certificate requirements should be confirmed in the purchase order.
Packaging and Export Delivery
Proper packaging helps protect galvanized steel sheets from transportation damage and moisture-related staining.
Export packaging arrangements may include:
Protective moisture-resistant wrapping
Steel or wooden pallets
Steel strapping
Edge and corner protection
Sheet bundle identification
Grade, size, and batch labels
Container loading and cargo securing
For international shipments, packaging should be selected according to sheet dimensions, bundle weight, destination, and transport conditions.
Bulk Order and Delivery Arrangements
Dongmeng Group supports international procurement requirements for galvanized sheet orders.
Quotation and delivery arrangements depend on:
Material grade and coating designation
Sheet thickness and dimensions
Order quantity
Processing requirements
Material availability
Required quality documentation
Destination port and Incoterms
Contact our sales team to confirm current MOQ, production scheduling, and shipment options.
Why Choose Xi'an Dongmeng Group Co., Ltd.?
1. ASTM Specification Coordination
We help international buyers clarify steel grade, zinc coating designation, dimensional requirements, and processing specifications before order confirmation.
2. Multiple Material Selection Options
We support sourcing requirements for commercial, forming, and selected structural galvanized steel grades.
3. Customized Sheet Dimensions
Cut-to-length galvanized sheets and customer-specific size requirements can be reviewed for bulk procurement.
4. Quality Documentation Support
We can coordinate mill certificates, inspection records, coating verification, and agreed third-party inspection.
5. Export-Oriented Supply Service
We support material sourcing, packaging arrangements, shipping documentation, and international order coordination.
6. Technical Purchasing Assistance
Our team can review specifications and application requirements to help customers identify suitable galvanized sheet options.
Frequently Asked Questions About ASTM A653 Galvanized Steel Sheet
1. What is ASTM A653 galvanized steel sheet?
ASTM A653 galvanized steel sheet is zinc-coated steel sheet produced by the continuous hot-dip process in accordance with ASTM A653/A653M. It is available in multiple steel designations and zinc coating grades.
2. What is the difference between ASTM A653 G60 and G90?
G60 specifies a minimum triple-spot coating weight of 0.60 oz/ft², while G90 specifies 0.90 oz/ft². Both values refer to the combined coating weight on both sides of the sheet.
3. Is ASTM A653 G90 equivalent to Z275?
G90 and Z275 have closely corresponding coating-mass requirements. However, they do not guarantee identical substrate grades, dimensional tolerances, or other specification requirements.
4. What thicknesses are available for ASTM A653 galvanized sheets?
An indicative procurement range is 0.30–3.00 mm. Actual availability varies according to grade, coating weight, sheet width, and production capabilities.
5. Can you supply 4×8 galvanized steel sheets?
The standard 4×8 ft size corresponds to approximately 1219 × 2438 mm. Availability and cut-to-length arrangements can be confirmed according to the requested thickness and quantity.
6. What is the difference between ASTM A653 CS Type B and SS Grade 50?
CS Type B is intended for general commercial fabrication, while SS Grade 50 is a structural steel grade with specified mechanical strength requirements. The correct option depends on the final application.
7. Can ASTM A653 galvanized sheet be used for roofing?
Yes. Galvanized steel sheets are used in roofing applications, provided that the steel grade, coating designation, thickness, profile design, and environmental requirements are appropriate.
8. Can ASTM A653 galvanized steel be welded?
Yes, with appropriate welding procedures, ventilation, and safety precautions. Welding can damage the zinc coating near the joint, so suitable post-weld protection may be required.
9. What is the difference between galvanized and galvannealed steel?
Galvanized steel has a predominantly zinc coating, whereas galvannealed steel has a zinc-iron alloy coating. Under ASTM A653, they use different coating designation systems and may differ in appearance, forming characteristics, and paint performance.
10. Can galvanized steel sheets be customized for OEM manufacturing?
Yes. Sheet size, material grade, coating designation, surface treatment, and selected processing requirements can be customized or coordinated, subject to manufacturing feasibility.
11. What certificates should I request when importing ASTM A653 sheets?
Buyers should request material certificates, coating-mass information, chemical and mechanical test records as applicable, and any project-specific third-party inspection documentation.
12. What information is required for an accurate quotation?
Provide the applicable ASTM standard, steel grade, coating designation, sheet thickness, width, length, quantity, surface treatment, delivery destination, and required inspection documents.
Request a Quote – ASTM A653 Galvanized Steel Sheet
Reliable Galvanized Steel Sheet Supply for International Buyers
Looking for an ASTM A653 galvanized steel sheet supplier in China?
Xi'an Dongmeng Group Co., Ltd. supports galvanized steel sheet procurement for metal distributors, HVAC manufacturers, steel fabricators, construction contractors, and OEM customers.
Whether you require G60 sheets for industrial fabrication, G90 galvanized sheets for construction, or cut-to-size structural-grade steel sheets, our team can review your material specifications and prepare a quotation based on the requested quantities and delivery requirements.
Send Us Your Purchasing Requirements
Standard: ASTM A653/A653M
Steel Grade: CS Type B / FS / DDS / SS Grade 33 / SS Grade 50
Coating: G60 / G90 / Other
Thickness: mm or decimal inches
Sheet Size: Width × Length
Quantity: Sheets or Metric Tons
Surface: Spangle / Treatment Requirements
Inspection: MTC / Third-Party Inspection
Delivery: Destination Port and Incoterms
Contact Xi'an Dongmeng Group Co., Ltd.
Email: office@dongmjd.com
Request a Quotation | Send Your Specifications | Contact Our Sales Team
Detailed specifications, processing availability, minimum order quantity, certificates and lead time will be confirmed during quotation.
Hot Tags: astm a653 galvanized steel sheet supplier | g60 & g90, China astm a653 galvanized steel sheet supplier | g60 & g90 manufacturers, suppliers, factory, AZ150 Coil, GI Coil, HDG Coil, Hot Dip Galvanized Steel Coil, nan, PE Coated Steel Coil


