Xi'an Dongmeng Group Co., Ltd. is one of the most reliable manufacturers and suppliers of mirror stainless steel coil in China, also supports customized service. With abundant experience, we warmly welcome you to wholesale cheap products in stock here and get free sample from our factory. For price consultation, contact us.
Mirror Stainless Steel Coil – 304/316L No.8 & 8K Polished Finish
Xi'an Dongmeng Group Co., Ltd. is a professional supplier and exporter of mirror stainless steel coils, providing No.8/8K polished stainless steel materials for international distributors, architectural contractors, elevator manufacturers, decorative panel producers and industrial fabricators.
Our mirror polished stainless steel coils are available in grades including 304, 304L, 316L and 430, with additional grades available for project-specific requirements. We support customized thicknesses, widths, coil weights, surface finishes, protective films and export packaging.
Designed for applications requiring a highly reflective metallic appearance, our mirror stainless steel coils can be processed into architectural cladding, elevator panels, decorative components, furniture surfaces and customized metal products.
For projects requiring specific reflectivity, visual consistency or surface protection, material specifications and approved reference samples can be agreed upon before production.
Request a Quote | Review Technical Specifications | Request a Surface Sample | Ask for MTC
What Is Mirror Stainless Steel Coil?
Mirror stainless steel coil is a cold-rolled stainless steel flat product that undergoes mechanical surface polishing and buffing to produce a highly reflective, non-directional surface.
Unlike standard bright-annealed stainless steel, a properly produced mirror-polished surface provides increased image clarity and a more uniform reflective appearance.
The term 8K stainless steel coil is commonly used in commercial markets to describe mirror-polished stainless steel. For formal technical specifications, ASTM No.8 and EN 2P are more useful reference designations.
Mirror stainless steel coils are particularly suitable for manufacturers that require a continuous supply of reflective stainless steel for subsequent slitting, sheet cutting, panel production and decorative fabrication.
Surface quality depends on several factors, including substrate condition, polishing process, flatness, handling and protective packaging.
For architectural or decorative applications, the required reflection quality should be confirmed using an approved production sample rather than relying only on the commercial term "8K."
Mirror Stainless Steel Coil Specifications
| Parameter | Specification |
| Product | Mirror Polished Stainless Steel Coil |
| Main Grades | 304 / 304L / 316L / 430 |
| Additional Grades | 201 / 301 / 321, subject to confirmation |
| Surface Finish | No.8 / 8K Mirror |
| Thickness | 0.3–3.0 mm (0.012–0.118 in) |
| Width | 500–2000 mm (19.7–78.7 in) |
| Common Widths | 1000 / 1219 / 1250 / 1500 mm |
| Coil Inner Diameter | 508 / 610 mm (20 / 24 in) |
| Coil Weight | Approximately 1–10 MT |
| Edge | Mill Edge / Slit Edge |
| Surface | Single-Side / Double-Side Mirror, subject to availability |
| Surface Protection | PE/PVC Film |
| Processing | Mirror Polishing / Slitting / Cut-to-Length |
| Material Standards | ASTM A240 / EN 10088-2 / JIS G4305 |
| Finish Reference | ASTM A480 No.8 / EN 10088-2 2P |
| Inspection | Chemical / Mechanical / Dimensional / Surface |
| Documentation | MTC / EN 10204 3.1 as ordered |
| Packaging | Moisture Protection + Edge Protection + Export Packing |
Dimensional Tolerance Note
Thickness and width tolerances are determined by the applicable material standard, ordered dimensions and processing route.
Tighter tolerances may be evaluated for specific projects but should not be assumed across the entire thickness and width range.
Wide-width mirror polishing, double-sided polishing and heavier coils require separate technical confirmation.
Mirror Stainless Steel Surface Finishes: No.8, 8K, BA and Super Mirror
Surface finish selection is particularly important for architectural and decorative stainless steel applications.
Different reflective finishes may look similar in photographs but can produce significantly different visual results in actual installation.
| Finish | Surface Characteristics | Typical Application |
| 2B | Smooth, moderately reflective mill finish | Further processing and polishing |
| BA / 2R | Bright annealed, highly reflective mill finish | Appliances and reflective decorative components |
| No.8 / 8K | Mechanically polished, non-directional mirror appearance | Elevator panels, architectural decoration |
| Enhanced / Super Mirror | Higher visual clarity requirements agreed against a sample | Premium decorative installations |
No.8 / 8K Mirror Finish
No.8 mirror finish is produced through progressively finer mechanical polishing followed by buffing.
The resulting surface is highly reflective and is suitable for applications where appearance is an important design requirement.
Typical uses include decorative wall panels, elevator interiors, architectural trim and premium stainless steel components.
BA Bright Annealed Finish
BA stainless steel is produced through bright annealing in a controlled atmosphere.
Although BA material has a bright reflective appearance, it is not technically identical to a mechanically polished No.8 mirror finish.
BA coil may be appropriate where moderate reflection is acceptable or where additional polishing is planned.
Enhanced Mirror Finish
For premium decorative applications, customers may specify enhanced polishing requirements.
These may include improved image clarity, tighter visual consistency and stricter acceptance criteria for scratches, polishing lines and surface distortion.
An approved physical sample is recommended before production.
304 vs 316L vs 430 Mirror Stainless Steel Coil
Selecting the correct stainless steel grade is essential for achieving suitable corrosion resistance, fabrication performance and project cost.
| Grade | Material Type | Main Advantages | Recommended Applications |
| 304 | Austenitic | Good corrosion resistance and formability | Elevators, interior panels, architectural decoration |
| 304L | Low-carbon Austenitic | Improved suitability for welded fabrication | Welded decorative panels and components |
| 316L | Molybdenum-bearing Austenitic | Improved resistance to chloride-related corrosion compared with 304 | Selected coastal architectural and humid environments |
| 430 | Ferritic | Magnetic, economical, good decorative performance | Indoor appliances, furniture and decorative trim |
| 201 | Austenitic | Economical option for selected indoor applications | Dry indoor decorative components |
304 Mirror Stainless Steel Coil
304 is a commonly selected grade for mirror-polished stainless steel products.
It offers a practical combination of corrosion resistance, formability, weldability and decorative performance.
Typical applications include elevator panels, interior wall coverings, furniture components and architectural trim.
316L Mirror Stainless Steel Coil
316L contains molybdenum, which generally improves resistance to chloride-induced pitting compared with 304.
It may be considered for selected coastal buildings, humid environments and architectural applications requiring improved corrosion resistance.
However, 316L is not immune to pitting, crevice corrosion or staining. Chloride concentration, temperature, surface condition, cleaning procedures and maintenance practices must still be evaluated.
430 Mirror Stainless Steel Coil
430 is a ferritic stainless steel commonly selected for decorative products and household appliances.
Its magnetic properties and lower alloy cost make it suitable for certain interior applications.
However, 430 generally offers lower corrosion resistance and different forming and welding characteristics than 304.
How to Select the Right Grade
For general interior architectural applications, 304 is often an appropriate starting point.
For welded components, consider 304L or 316L according to service conditions.
For selected applications with higher chloride exposure, evaluate 316L together with the actual operating environment.
For cost-sensitive indoor decorative products, 430 or a specified 201 grade may be considered where their corrosion resistance and forming characteristics are sufficient.
Chemical Composition of Mirror Stainless Steel Coil
Mirror finishing changes the surface appearance but does not change the specified chemical composition of the stainless steel grade.
The following table summarizes selected alloying elements for common stainless steel grades.
| Grade | UNS | Carbon Max. | Chromium | Nickel | Molybdenum |
| 304 | S30400 | 0.08% | 18.0–20.0% | 8.0–10.5% | - |
| 304L | S30403 | 0.03% | 18.0–20.0% | 8.0–12.0% | - |
| 316L | S31603 | 0.03% | 16.0–18.0% | 10.0–14.0% | 2.0–3.0% |
| 430 | S43000 | 0.12% | 16.0–18.0% | ≤0.75% | - |
Values are expressed as mass percentages and are provided as a general selection reference. Complete chemical limits, including Mn, Si, P, S and other applicable elements, must be verified against the specified standard and material certificate.
Mechanical Properties of Mirror Stainless Steel Coil
The mechanical properties of mirror stainless steel coil are primarily determined by its material grade, processing history and delivery condition.
Mirror polishing itself should not be regarded as a strength-enhancing treatment.
| Grade | Tensile Strength | 0.2% Proof / Yield Strength | Elongation |
| 304 | ≥515 MPa | ≥205 MPa | Typically ≥40% |
| 304L | ≥485 MPa | ≥170 MPa | Typically ≥40% |
| 316L | ≥485 MPa | ≥170 MPa | Typically ≥40% |
| 430 | ≥450 MPa | ≥205 MPa | Typically ≥22% |
These are illustrative values for commonly specified annealed product conditions, not universal acceptance limits. Actual requirements vary with specification, thickness, product form and delivery condition.
For projects involving demanding bending, stamping or forming operations, the required mechanical properties should be confirmed before ordering.
Physical Properties
| Property | 304 | 316L | 430 |
| Stainless Steel Family | Austenitic | Austenitic | Ferritic |
| Density | Approx. 7.9 g/cm³ | Approx. 8.0 g/cm³ | Approx. 7.7 g/cm³ |
| Magnetic Behavior | Generally non-magnetic when annealed | Generally non-magnetic when annealed | Magnetic |
| Relative Thermal Expansion | Higher | Higher | Lower |
| Corrosion Resistance | Good in many general environments | Improved chloride resistance compared with 304 | Suitable for many mild environments |
| Formability | Good | Good | Application-dependent |
Cold working can increase the magnetic response of certain austenitic stainless steels.
Physical and corrosion properties should be assessed according to the actual grade, material condition and operating environment.
Mirror Stainless Steel Coil Manufacturing Process
Producing a high-quality mirror stainless steel coil requires control of both the base material and the surface-finishing process.
1. Raw Material Selection
Cold-rolled stainless steel substrate is selected according to the specified grade, thickness, width and required surface condition.
2. Surface Preparation
The substrate is inspected and prepared for polishing.
Surface defects, contamination or irregularities may affect the final mirror appearance.
3. Progressive Mechanical Polishing
The stainless steel surface is progressively polished using appropriate abrasive stages.
The objective is to reduce surface irregularities and remove visible grinding marks from previous processing stages.
4. Fine Polishing and Buffing
Fine polishing and buffing improve the reflective appearance and image clarity.
The final result depends on the substrate condition, polishing equipment, process parameters and agreed surface acceptance requirements.
5. Surface Inspection
The finished surface is checked for relevant appearance defects and consistency.
6. Protective Film Application
A suitable protective film is applied when specified to reduce handling and transportation damage.
7. Coil Rewinding and Packaging
The finished material is rewound under controlled handling conditions and prepared for delivery.
Surface protection and winding tension are particularly important for decorative mirror coils.
Surface Quality Requirements for Mirror Stainless Steel Coil
A mirror finish should be evaluated by more than its commercial finish name.
For projects requiring consistent visual appearance, the following characteristics should be considered.
| Inspection Item | Quality Control Requirement |
| Mirror Appearance | Consistent reflection across the approved inspection area |
| Image Clarity | Evaluated against an approved reference sample |
| Surface Scratches | Acceptance limits defined in the purchase specification |
| Polishing Lines | Controlled according to the specified finish |
| Surface Stains | No unacceptable oil marks, residue or contamination |
| Surface Distortion | Controlled according to agreed flatness and appearance requirements |
| Surface Roughness | Measured when specified; not a substitute for reflection-quality approval |
| Surface Gloss | Evaluated where an agreed test method and target are specified |
| Protective Film | Suitable adhesion and clean removal under agreed conditions |
| Edge Quality | Controlled burrs and edge damage |
| Coil Surface Consistency | Inspected at agreed positions along the coil |
Surface Roughness and Reflectivity
Surface roughness and mirror reflectivity are related but are not interchangeable measurements.
A low Ra value does not automatically guarantee good image clarity, uniform reflection or freedom from waviness.
Where appearance is critical, buyers should specify an approved sample, an inspection method and any required gloss or reflection criteria.
Mirror Stainless Steel Coil Processing and Fabrication
Mirror polished stainless steel coils can be processed into a wide range of decorative and industrial components.
However, surface protection should be included in the fabrication plan.
Slitting
Mirror stainless steel coils can be slit into narrower strips for decorative trim, panels and manufactured components.
Slitting equipment should use suitable handling methods to minimize scratches, edge damage and contamination.
Cut-to-Length
Mirror coils can be cut into flat sheets for elevator panels, wall cladding and decorative products.
Flatness, coil set, surface direction and film protection should be considered when producing finished sheets.
Bending and Forming
Suitable grades may be bent or formed into decorative components.
Bending radius, tooling condition, material thickness and protective-film compatibility must be reviewed to prevent surface marking or cracking.
Stamping and Fabrication
Mirror stainless steel can be used for selected stamped and fabricated products.
For demanding forming operations, material temper, forming geometry and surface-protection strategy should be confirmed.
Welding
Weldability depends on the selected stainless steel grade.
304L and 316L are often preferred for certain welded components because of their low carbon content.
Welding and heat-affected areas may require cleaning, corrosion-restoration treatment and mechanical repolishing to recover the desired decorative finish.
A polished mirror surface should not be expected to remain unchanged after welding or severe forming.
Applications of Mirror Stainless Steel Coil
Elevator Interior Panels
Mirror stainless steel is used in elevator cabins, door panels, decorative frames and interior trim.
304 mirror coil is commonly considered for general interior installations, while 316L may be evaluated for more aggressive exposure conditions.
Architectural Wall Cladding
Mirror stainless steel can be processed into decorative wall coverings, columns, interior facades and architectural panels.
The final appearance depends on sheet flatness, substrate support, installation methods and lighting conditions.
Decorative Stainless Steel Panels
Mirror coils provide feedstock for manufacturers producing decorative stainless steel sheets, partitions, ceiling panels and custom metal components.
Furniture and Interior Design
Applications include furniture trim, display fixtures, cabinet surfaces, decorative partitions and retail interiors.
Kitchen and Appliance Decoration
Selected grades can be used in decorative appliance panels, range hood covers and kitchen equipment housings.
Material selection must match the cleaning environment and applicable product requirements.
Commercial and Retail Decoration
Mirror polished stainless steel can be used for shop displays, hotel interiors, reception areas and premium architectural features.
For highly visible installations, project-specific visual acceptance samples are recommended.
Product Standards and Material Traceability
Mirror stainless steel coil procurement should distinguish between the base material standard and the required decorative surface finish.
| Standard | Main Purpose |
| ASTM A240/A240M | Material requirements for applicable stainless steel plate, sheet and strip |
| ASTM A480/A480M | General requirements, tolerances and surface finish descriptions |
| EN 10088-2 | Technical delivery conditions for stainless steel sheet, plate and strip |
| JIS G4305 | Cold-rolled stainless steel plate, sheet and strip |
| EN 10204 | Types of inspection documents |
For mirror surface requirements, ASTM No.8 and EN 2P provide useful specification references.
The material standard does not replace the need for agreement on cosmetic appearance, especially for large decorative panels.
The applicable standard edition, grade, product form and surface acceptance criteria should be identified in the purchase order.
Inspection & Quality Assurance
Xi'an Dongmeng Group Co., Ltd. supports project-specific material verification and inspection arrangements for mirror stainless steel coil orders.
Material Verification
Chemical composition is checked against the ordered stainless steel grade and applicable material documentation.
PMI may be requested where appropriate for alloy identification.
Dimensional Inspection
Thickness, width, coil inner diameter, coil weight and edge condition are checked according to the purchase requirements.
Mechanical Testing
Tensile properties and other required mechanical characteristics are verified through applicable material testing and mill documentation.
Mirror Surface Inspection
Visual inspection focuses on the agreed finish quality, including scratches, stains, polishing marks, reflection consistency and surface defects.
Approved reference samples may be used for appearance-critical projects.
Surface Protection Inspection
Protective-film condition, edge protection and packaging compatibility are reviewed before shipment.
Material Test Certificates
Mill Test Certificates, including EN 10204 Type 3.1 where specified and available, can support material traceability.
Third-party inspection may be arranged according to contractual requirements.
Packaging and Shipping
Mirror stainless steel coils require particular care during handling, storage and transportation because polished surfaces can be damaged by friction, impact and contamination.
Packaging options include:
Protective PE/PVC film on the specified finished surface.
Moisture-resistant wrapping.
Edge protectors to reduce handling damage.
Suitable coil supports and pallets.
Secure strapping with appropriate protective separation.
Seaworthy export packaging.
Additional protection for appearance-critical decorative products.
Packaging requirements should be confirmed according to coil dimensions, shipping method and unloading equipment.
For international orders, shipping marks, material identification and corresponding documentation can be arranged according to contract requirements.
Why Choose Xi'an Dongmeng Group Co., Ltd.?
Multiple Stainless Steel Grades
We support procurement of mirror stainless steel coils in widely used grades including 304, 304L, 316L and 430, helping customers select materials according to corrosion resistance, processing requirements and application conditions.
Customized Coil Specifications
Thickness, width, coil weight, edge condition and processing requirements can be reviewed against project specifications.
Surface Finish Selection
We support customers in comparing mirror finish options and defining appearance requirements through technical specifications and approved samples.
Quality Documentation
Material traceability, inspection documentation and third-party inspection arrangements can be discussed according to customer requirements.
Export-Oriented Packaging
Protective packaging options are available to help minimize damage to mirror-polished surfaces during international transportation.
Technical Procurement Support
Our team supports distributors, manufacturers and project buyers with product specifications, material selection, sample requests and quotation preparation.
Mirror Stainless Steel Coil – Frequently Asked Questions
1. What is mirror stainless steel coil?
Mirror stainless steel coil is cold-rolled stainless steel that has undergone mechanical polishing and buffing to produce a highly reflective surface.
It is commonly used in decorative panels, elevator interiors, architectural components and customized stainless steel products.
2. What does 8K mean in stainless steel coil?
8K is a widely used commercial term for mirror-polished stainless steel.
For technical procurement, ASTM No.8 or EN 2P surface references and an approved appearance sample are recommended.
3. Is BA stainless steel the same as 8K mirror stainless steel?
No.
BA is a bright-annealed mill finish, while No.8 mirror stainless steel is mechanically polished and buffed.
No.8 generally provides clearer reflected images than standard BA material.
4. Which grades are available for mirror stainless steel coils?
Common options include 304, 304L, 316L and 430.
Other grades may be considered depending on material availability, polishing compatibility and project requirements.
5. What thicknesses are available?
The published supply range is approximately 0.3–3.0 mm.
Actual availability depends on the selected grade, width, mirror-finishing process and order quantity.
6. Can mirror stainless steel coils be supplied in customized widths?
Yes, customized widths may be arranged through appropriate coil supply and slitting processes.
Width availability and tolerance requirements should be confirmed before ordering.
7. Is 316L mirror stainless steel suitable for coastal environments?
316L generally provides better resistance to chloride-induced pitting than 304.
However, coastal suitability depends on salt deposition, cleaning, temperature, exposure and component design.
316L should not be considered immune to marine corrosion.
8. Can mirror stainless steel coil be bent or welded?
Yes, depending on the selected grade and fabrication requirements.
However, bending and welding can affect the polished surface, and subsequent finishing may be necessary.
9. How is mirror surface quality inspected?
Visual inspection, approved surface samples, dimensional checks and agreed gloss or reflection measurements may be used.
Ra measurements alone are not sufficient to define the complete mirror appearance.
10. What information is required for a quotation?
Please provide the material grade, thickness, width, coil weight, surface finish, single- or double-sided polishing requirements, protective-film type, quantity and delivery destination.
If a particular mirror appearance is required, please also provide an approved sample or reference specification.
Contact Us – Request Mirror Stainless Steel Coil Specifications & Quotation
Xi'an Dongmeng Group Co., Ltd.
Looking for a reliable supplier of 304, 316L or 430 mirror polished stainless steel coils?
Contact our team to discuss your material requirements, surface finish, processing specifications and delivery arrangements.
We support international B2B procurement for architectural contractors, stainless steel distributors, decorative panel manufacturers, equipment producers and metal fabricators.
Request a Quotation
Ask for an 8K Mirror Surface Sample
Request Technical Specifications & MTC
Discuss Custom Coil Dimensions
Office Information
Company: Xi'an Dongmeng Group Co., Ltd.
Phone / WhatsApp: +86 15769214734
Email: office@dongmjd.com
Office Address: Room 4107, Runfeng Building, Sanqiao New Street, Weiyang District, Xi'an City, Shaanxi Province, China
Hot Tags: mirror stainless steel coil, 8K stainless steel coil, No.8 stainless steel coil, mirror polished stainless steel coil, 304 mirror stainless steel coil, 316L mirror stainless steel coil, mirror finish stainless steel coil supplier, decorative stainless steel coil, stainless steel mirror coil, polished stainless steel coil, 430 mirror stainless steel coil, mirror finish stainless steel coil manufacturer, 440C Stainless Steel
